• tPad_Top


Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)

5-Megapixel Digital Image Sensor Module

7″ LCD Touch Screen Module

Request Quote


Product Description

VEEK MT C5SoC Board Description

The Video and Embedded Evaluation Kit – Multi-touch on Cyclone® V SoC Development Board (VEEK-MT-C5SoC) is a comprehensive design environment with everything embedded developers need to create processing-based systems. VEEK-MT-C5SoC delivers an integrated platform that includes hardware, design tools, intellectual property (IP) and reference designs for developing embedded software and hardware platform in a wide range of applications. The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific application. The VEEK-MT-C5SoC features the Altera Cyclone® V SoC development board targeting the Altera Cyclone® V SX SoC FPGA, as well as a capacitive LCD multimedia color touch panel which natively supports multi-touch gestures. A 5-megapixel digital image sensor, ambient light sensor, and 3-axis accelerometer make up the rich feature-set.

The all-in-one embedded solution offered on the VEEK-MT-C5SoC, in combination of the LCD touch panel and digital image module, provides embedded developers the ideal platform for multimedia applications with unparallel processing performance. Developers can benefit from the use of FPGA-based embedded processing system such as mitigating design risk and obsolescence, design reuse, reducing bill of material (BOM) costs by integrating powerful graphics engines within the FPGA, and lower cost.


SoC Embedded Design Suite Subscription Edition

  • ARM Development Studio 5 (DS-5™) Altera Edition Toolkit
  • Hardware-to-software handoff tools
  • Linux run-time software for application development
  • SoC hardware libraries for firmware development
  • Application example

Cyclone V SX SoC-5CSXFC6D6F31C6N(SoC)

  • 110K LEs, 41509 ALMs
  • 5140 M10K memory blocks
  • 224 18×18 Multiplier
  • 6 FPGA PLLs and 3 HPS PLLs

Configuration Device and USB Blaster Circuit

  • Active Serial (AS) x1 or x4 configuration (EPCQ256SI16N)
  • MAX V CPLD (5M2210ZF256I5N) in a 256-pin FBGA package as the System Controller
  • Flash fast passive parallel (FPP) configuration
  • MAX II CPLD (EPM570GM100) as part of the embedded USB-BlasterTM II for use with the Quartus® II Programmer

Memory Devices

  • One 1,024-Mbyte (MB) HPS DDR3 SDRAM with error correction code (ECC) support
  • One 1,024-MB FPGA DDR3 SDRAM
  • One 256-Megabit (Mb) quad serial peripheral interface (QSPI) flash
  • One 512-Mb CFI flash
  • One 32-Kb I2C serial electrically erasable PROM (EEPROM)
  • One Micro SD flash memory card

LEDs and Displays

  • Eight user LEDs
  • One configuration load LED
  • One configuration done LED
  • One error LED
  • Three configuration select LEDs
  • Four on-board USB-Blaster II status LEDs
  • One HSMC interface LED
  • Two UART data transmit and receive LEDs
  • One power on LED
  • One two-line character LCD display

Push Buttons

  • One CPU reset push button
  • One MAX V reset push button
  • One program select push button
  • One program configuration push button
  • Six general user push buttons

DIP Switches

  • One MAX V CPLD System Controller control switch
  • One JTAG chain control DIP switch
  • One mode select DIP switch
  • One general user DIP switch

On-board Clocking Circuitry

  • Si570, Si571, and Si5338 programmable oscillators
  • 25-MHz, 50-MHz,100-MHz, 125-MHz, 148.50-MHz, and 156.25-MHz oscillators
  • SMA input (LVCMOS)

Communication Ports

  • One PCI Express x4 Gen1 socket
  • One universal HSMC port
  • One USB 2.0 on-the-go (OTG) port
  • One Gigabit Ethernet port
  • Dual 10/100 Ethernet ports
  • One SDI port (option for SMA connection)
  • One controller area network (CAN) port
  • One RS-232 UART (through the mini-USB port)
  • One real-time clock


  • 14–20-V (laptop) DC input


  • 5.2″ × 8.2″ rectangular form factor

Capacitive LCD Touch Screen

  • Equipped with an 7-inch Amorphous-TFT-LCD (Thin Film Transistor Liquid Crystal Display) module
  • Module composed of LED backlight
  • Support 24-bit parallel RGB interface
  • Converting the X/Y coordination of touch point to its corresponding digital data via the Touch controller

5-Megapixel Digital Image Sensor

  • Superior low-light performance
  • High frame rate
  • Global reset release, which starts the exposure of all rows simultaneously
  • Bulb exposure mode, for arbitrary exposure times
  • Snapshot-mode to take frames on demand
  • Horizontal and vertical mirror image
  • Column and row skip modes to reduce image size without reducing field-of-view
  • Column and row binning modes to improve image quality when resizing
  • Simple two-wire serial interface
  • Programmable controls: gain, frame rate, frame size, exposure

Digital Accelerometer

  • Up to 13-bit resolution at +/- 16g
  • SPI (3- and 4-wire) digital interface
  • Flexible interrupts modes

Ambient Light Sensor

  • Approximates human-eye response
  • Precise luminance measurement under diverse lighting conditions
  • Programmable interrupt function with user-defined upper and lower threshold settings
  • 16-bit digital output with I2C fast-mode at 400 kHz
  • Programmable analog gain and integration time
  • 50/60-Hz lighting ripple rejection



 VEEK-MT C5SoC Documents

 VEEK-MT C5SoC User Manual


Kit contents

  • VEEK-Mt C5SoC Development Board
  • Power Supply(19v)
  • 12v FAN
  • Battery 1.55v
  • MICRO SDCARD and Card Reader
  • Power Cable
  • Mini Jumber x4
  • Screw and Copper Pillar Package
  • Type A-B Mini USB Cable
  • SMB-SMB Cable
  • HSMC Loopback Adapter
  • HSMC Debug Board
  • Linear Blaster
  • Power Cable(UK)
  • Power Cable(Euro)
  • USB Cable
  • Ethernet Cable
  • DEMO 934A LTC2607CDE 16bit Dual Rail-TO- Rail DAC with 12c Interface
  • USB 2.0, A-Male to mini B Cable

Additional Information

Weight 3,600 kg
FLash Memory








Core Manufacturer

Altera FPGA Boards


Cyclone V



Video In

Video Out


10/100 – 2

Clocking Frequency

25-MHz, 50-MHz,100-MHz, 125-MHz, 148.50-MHz, and 156.25-MHz

SD Card Socket





USB 2.0 OTG, Mini USB 2.0



COM Port



14V to 20V