Menu

Zynq Mini Video Dev Board Full Suite 7Z020

/Zynq Mini Video Dev Board Full Suite 7Z020
  • 7020 Display Linux

Zynq Mini Video Dev Board Full Suite 7Z020

 19,425.00

Xilinx XC7Z020-1CLG400C

Integrated Artix-7 class FPGA subsystem with 28K logic cells, 17,600 LUTs, 80 DSP slices

667MHz ARM® dual-core Cortex™-A9 MPCore processor (up to 866MHz)

NEON™ & Single / Double Precision Floating Point for each processor

Supports a Variety of Static and Dynamic Memory Interfaces

On board 3-axis Acceleration & Temperature sensor

Product Description

Description

Zynq Mini Video Dev Board Full Suite 7Z020 is a low-cost and high-performance Single Board Computer (SBC) built around the Xilinx Zynq-7010 (XC7Z020-1CLG400C) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic.

This Zynq Mini Video Dev Board Full Suite 7Z020 takes full features of the Zynq-7020 , it has 1GB DDR3 SDRAM and 16MB QSPI Flash on board and a set of rich peripherals including USB-to-UART, Mini USB OTG, 10/100/1000Mbps Ethernet, CAN, HDMI, TF, JTAG, Buzzer, G-sensor and Temperature sensor. On the rear of the board, there are two 1.27mm pitch 80-pin SMT female connectors to allow the availability of 96 / 106 user I/O and configurable as up to 39 LVDS pairs I/O.

Specification 

FPGA Device

  • Xilinx XC7Z020-1CLG400C
  • 667MHz ARM® dual-core Cortex™-A9 MPCore processor (up to 866MHz)
  • Integrated Artix-7 class FPGA subsystem with 28K logic cells, 17,600 LUTs, 80 DSP slices
  • NEON™ & Single / Double Precision Floating Point for each processor
  • Supports a Variety of Static and Dynamic Memory Interfaces

Memory

  • 1GB DDR3 SDRAM (2 x 512MB, 32-bit)

Storage

  • 16MB QSPI Flash
  • TF card interface

Communication

  • 1 x 10/100/1000M Ethernet
  • 1 x CAN
  • 1 x Mini USB 2.0 OTG
  • 1 x USB-UART debug interface

Connectors

  • Two 40-pin Expansion Headers
  • One 10-pin ADC Input Header
  • One LTC connector (One Serial Peripheral Interface (SPI) Master ,one I2C and one GPIO interface )

Display

  • 1 x HDMI (supports 1080p resolution)

User I/O

    Brought out via two 1.27mm pitch 80-pin SMT female connectors

  • 90/106 user I/O (7010/7020)
  • Configurable as up to 39 LVDS pairs I/O

Power Supply

  • USB power supply or DC 5V/2A

Sensors

  • 3-axis Acceleration sensor
  • Temperature sensor

Switches, Buttons and Indicators

  • 1 x 2.54mm pitch 14-pin JTAG interface
  • 2 x Buttons (1x Reset, 1 x User)
  • 4-channel toggle switch
  • 5 x LEDs (3 x User LEDs, 1 x Power indicator, 1 RGB LED)
  • 1 x Buzzer

Dimenssions

  • 63mm x 102mm x 1.6mm (8-layer PCB design)

Optional Connectivity

IO Cape

IO Cape with Zynq Mini Video Dev Board

Resources 

Document

Board Overview

 Board Schematic

Deliverables

Kit contents

  • Zynq Mini Video Dev Board
  • 1.5m cross Ethernet cable
  • 1.5m Mini USB2.0 cable
  • 5V/2A Power adapter
  • Mini USB OTG Data cable
  • HDMI cable
  • 4GB TF card
  • Product Disk